Power Trim Pump

The technical area for everything relating to your powerplant. Post your questions and answers here...

Moderators: Alacrity, Rapier

Sweep
Posts: 98
Joined: Mon Jan 18, 2010 7:31 pm
CMBA Member: 0

Re: Power Trim Pump

Post by Sweep »

fullsizeoutput_1ca.jpeg
fullsizeoutput_1ce.jpeg
fullsizeoutput_1cc.jpeg
fullsizeoutput_1bc.jpeg
fullsizeoutput_1bb.jpeg
fullsizeoutput_1ba.jpeg
On each pump there is one bolt from the reservoir tank to motor end cap that is rotten at the end of the thread.
Both end caps are rusty, one brush requires re-soldering.
Hydraulic valve bodies untested.
Reservoir tanks OK, fill screws need replacing, threads OK.
Armatures 'look' OK - untested.

broompisces
Posts: 156
Joined: Tue Feb 17, 2009 8:20 pm
CMBA Member: 768
Location: Glasgow, Scotland

Re: Power Trim Pump

Post by broompisces »

Thanks for posting those images, Sweep.
I'll see what the one that's on its way to me is like - I bought it as "working".
I was tempted to get a company I've used before to service the motor - but maybe it's a case of "let sleeping dogs lie"?

Post Reply