Project Shed

A dedicated area to showcase your ongoing and completed restorations.

Moderators: Alacrity, Rapier

User avatar
bigminiandy
Posts: 357
Joined: Fri Feb 06, 2009 8:11 pm
CMBA Member: 739
Location: Cannock, staffs

Project Shed

Post by bigminiandy »

Not so much of a restoration but a shed in which restorations will take place. Thats the plan anyway.

The ditch
Image

Brick retainer wall to compensate for the drop of the garden
Image

Levelled and subase
Image

Next is the membrane and the concrete floor. Then the walls go up :woo:


More to follow. Hopefully the Fenn and Wood won't got too cold and damp this winter
Life isn't a rehearsal!!!

Fenn and Wood restoration http://s1098.photobucket.com/albums/g36 ... ood%20MK2/

User avatar
welshhealey
Posts: 267
Joined: Sat Feb 07, 2009 2:14 am
CMBA Member: 71

Re: Project Shed

Post by welshhealey »

Will the boat and trailer fit in that space ? ? :hmmm: unless camera angle makes area looks deceptively small ! :shock: nice brickwork though :perfect: and looking at pics gives me an incentive to sort my winter storage out . ! ! not an easy task :grrr:

eastcoast
Posts: 182
Joined: Sun Jul 05, 2009 4:13 pm
CMBA Member: 0

Re: Project Shed

Post by eastcoast »

I would say it's 8'6" ? plenty big. just watch that dpc andy. As your not doing cavity you will need a couple of pillars in there too. good luck.

User avatar
bigminiandy
Posts: 357
Joined: Fri Feb 06, 2009 8:11 pm
CMBA Member: 739
Location: Cannock, staffs

Re: Project Shed

Post by bigminiandy »

Yep it'll definatly fit. It's 20ft long and 8ft and a bit wide. Any thing is better than sitting under a tarpaulin on the in-laws garden.

Don't worry insulation and damp courses have all been thought of so that will be dealt with. If needed the boat can go in the garage (23ft) and the old mini and the Harley can go in the shed, but I'm very sure it won't come to that. I'm hoping the rain will hold out over the weekend despite te bank holiday forecast that way I can get the floor done.
Life isn't a rehearsal!!!

Fenn and Wood restoration http://s1098.photobucket.com/albums/g36 ... ood%20MK2/

User avatar
floater
Posts: 1065
Joined: Fri Feb 06, 2009 6:47 pm
CMBA Member: 90
Location: Southern England

Re: Project Shed

Post by floater »

Nice job Andy. I would say it is a perfect topic for the restorations category having seen some of the sheds that turn up on here :giggle:

Could do with a similar set up myself, did you do the brickwork and what are your rates? :drink:

:nice: :? :hmmm:

User avatar
bigminiandy
Posts: 357
Joined: Fri Feb 06, 2009 8:11 pm
CMBA Member: 739
Location: Cannock, staffs

Re: Project Shed

Post by bigminiandy »

Yep i did the brickwork, went quite well for a first attempt. If I can do it anybody can. So long as the first line of bricks is straight and level the rest is easy. The worst part so far has been carrying the 2 ton of Subase/hardcore from the drive through to the garden.

I've started the concreating :D Going to do it in 5 stages/sections. One done 4 to go.
Life isn't a rehearsal!!!

Fenn and Wood restoration http://s1098.photobucket.com/albums/g36 ... ood%20MK2/

User avatar
Howstar
Posts: 682
Joined: Sat Feb 07, 2009 7:04 pm
CMBA Member: 0
Location: stockport chehire

Re: Project Shed

Post by Howstar »

Are you going to cut out the old window, and make door there ?.

or would it be easy if you put the boat in the front room. or by a boat that did not need fixing :hilarious:

User avatar
bigminiandy
Posts: 357
Joined: Fri Feb 06, 2009 8:11 pm
CMBA Member: 739
Location: Cannock, staffs

Re: Project Shed

Post by bigminiandy »

Yep back wall and window are going so I can squeeze the boat and trailer through. Window will be reused in side of the shed to provide light (and air) whilst the roof will be perspex type to again let the light through.
Life isn't a rehearsal!!!

Fenn and Wood restoration http://s1098.photobucket.com/albums/g36 ... ood%20MK2/

User avatar
Rapier
Site Admin
Posts: 13892
Joined: Thu Feb 05, 2009 5:16 pm
CMBA Member: 569
Location: West Glos

Re: Project Shed

Post by Rapier »

Years of doing it outside have taught me nothing beats being dry (and warm) while working on boats and motors, so hope it's spot on when you're finished.
Fasten bra straps and remove dentures...

User avatar
bigminiandy
Posts: 357
Joined: Fri Feb 06, 2009 8:11 pm
CMBA Member: 739
Location: Cannock, staffs

Re: Project Shed

Post by bigminiandy »

Well the sun has been out for the last few days and I've finally been able to finish the floor of the shed.

Image

Even had enough concrete to build a base for a brick BBQ.

Image


Now gotta measure up for the wood. Where's that tape measure :hmmm:
Life isn't a rehearsal!!!

Fenn and Wood restoration http://s1098.photobucket.com/albums/g36 ... ood%20MK2/

Post Reply