Ray Wright Delta GRP
-
- Posts: 3
- Joined: Thu Dec 14, 2017 10:39 am
- CMBA Member: 0
Ray Wright Delta GRP
Hi all , I "acquired " a GRP Ray Wright Delta, James has now taken on the project and needs a marinised Ford V4 or a 1600 any suggestions, ? I have an old Ford 3 litre V6 without a carb in the shed if anybody fancies a project. What's the trick to adding photos ? I've cut n cropped but still " file to large" !
- Rapier
- Site Admin
- Posts: 13959
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: Ray Wright Delta GRP
Hi, hope this might help with the loading pics. Am sure there are other photo resizers out there but this works for me.
viewtopic.php?p=36422#p36422
Good luck with the project Delta; they go very well with the 1600.
viewtopic.php?p=36422#p36422
Good luck with the project Delta; they go very well with the 1600.
Fasten bra straps and remove dentures...
-
- Posts: 26
- Joined: Fri Aug 14, 2020 5:17 pm
- CMBA Member: 0
Re: Ray Wright Delta GRP
I have a Worthy Blake 1600 cross flow available. It is the ford unit, fully marinised (even has a sump oil cooler, marine exhaust manifold and jabsco pump).
I purchased it off ebay for a project. it has had some work done as all the blanking caps on the block and head are new. the seller promised to send me details of the work carried out, but 18 months later and lots of emails, i have given up.
It is currently mated to a HyDrive gear box and looks like it came from a river cruiser.
I have done nothing with it, but if you are interested i can do a compression test and try to get it running.
T
I purchased it off ebay for a project. it has had some work done as all the blanking caps on the block and head are new. the seller promised to send me details of the work carried out, but 18 months later and lots of emails, i have given up.
It is currently mated to a HyDrive gear box and looks like it came from a river cruiser.
I have done nothing with it, but if you are interested i can do a compression test and try to get it running.
T
- Attachments
-
- worthy blake 2.jpg (30.02 KiB) Viewed 5622 times
-
- worthy blake 1.jpg (27.22 KiB) Viewed 5622 times
-
- Posts: 3
- Joined: Thu Dec 14, 2017 10:39 am
- CMBA Member: 0
Re: Ray Wright Delta GRP
Hi Tim
That sounds great, good ol eBay ! I've popped a pm over to you
Best regards Peter
That sounds great, good ol eBay ! I've popped a pm over to you
Best regards Peter