Broom Scorpio Restoration

A dedicated area to showcase your ongoing and completed restorations.

Moderators: Alacrity, Rapier

User avatar
knarloid
Posts: 164
Joined: Wed Feb 11, 2009 11:57 am
CMBA Member: 754
Location: New Jersey, USA (missing Ireland)
Contact:

Re: Broom Scorpio Restoration

Post by knarloid »

I used that last Spring to remove the old paint on West Wind (grp). A few photos here:
http://www.cmba-uk.com/coppermine/cpg14 ... p?album=86

I found it great stuff to work with, but the warmer spring weather definitely helped it to activate. I also found that you need to keep lashing it on every 20 mins (several layers) on thick paint to shift the deeper coats. I had some patches that took several days to get completely removed.
Plenty of elbow grease went into it over several months. Fond memories..... :hmmm: (the family didn't see me often last Spring :tumbleweed: )

User avatar
AussieMike
Posts: 48
Joined: Thu Nov 17, 2011 10:22 pm
CMBA Member: 0
Location: Les Cars, Haute Vienne, france

Re: Broom Scorpio Restoration

Post by AussieMike »

How did it all go, I read so far and then no more - it looked a great project and one you must finish. Bruce

Post Reply