evinrude control cables

For pre 1975 outboards and race motors only.

Moderators: Alacrity, Rapier

Post Reply
carl minshall
Posts: 81
Joined: Sun Feb 08, 2009 9:24 pm

evinrude control cables

Post by carl minshall »

Hi, Having no luck finding a 1950s 60s OMC gear shift cable, 12foot long, can any one help or know where you can buy the cable, or just the inner cable at a push?

Thank Carl.

User avatar
Rapier
Site Admin
Posts: 13892
Joined: Thu Feb 05, 2009 5:16 pm
CMBA Member: 569
Location: West Glos

Re: evinrude control cables

Post by Rapier »

I was just about to list some on ebay...Is it this type? Think they called them 'type o' and are always listed as pre-1979. The pair with the correct ends are about 12 1/2 ft. The coiled one without the ends is NOS and about 16ft...feels a bit stiff though, so will need the WD-40 treatment.
Attachments
P1250172 (Medium).JPG
P1250173 (Medium).JPG
P1250174 (Medium).JPG
Fasten bra straps and remove dentures...

carl minshall
Posts: 81
Joined: Sun Feb 08, 2009 9:24 pm

Re: evinrude control cables

Post by carl minshall »

Hi Nick,
The one in your lower photo with the round bar type ends on the outer cable, is the same ends as I got,is this 12ft long? and for sale?

Thanks Carl.

carl minshall
Posts: 81
Joined: Sun Feb 08, 2009 9:24 pm

Re: evinrude control cables

Post by carl minshall »

Hi, Nick,
Forget the last reply I just work out how to read the photos, the last two are photos are of each end of a pair of cables :grrr: so can you please give me a price for the12ft pair with post.

Thanks Carl.

User avatar
Rapier
Site Admin
Posts: 13892
Joined: Thu Feb 05, 2009 5:16 pm
CMBA Member: 569
Location: West Glos

Re: evinrude control cables

Post by Rapier »

PM sent
Fasten bra straps and remove dentures...

Post Reply