Does anyone know the specification of a suitable modern aluminium/duralumin sheet for making a patch to repair the hull of an Albatross?
Or where it can be obtained?
Aluminium/Duralumin sheet specification
-
- Posts: 10
- Joined: Thu Jun 10, 2010 6:41 pm
- CMBA Member: 0
- Rapier
- Site Admin
- Posts: 13940
- Joined: Thu Feb 05, 2009 5:16 pm
- CMBA Member: 569
- Location: West Glos
Re: Aluminium/Duralumin sheet specification
Might not help but 1954 info. says alloy specification was A.W.5C. Bottom and decking thickness was 14 s.w.g and sides, bulkheads and transom 16 s.w.g.
Fasten bra straps and remove dentures...
Re: Aluminium/Duralumin sheet specification
Suggest you have a try at the search function on this site. Some while ago there was a thread including a source.
Re: Aluminium/Duralumin sheet specification
Hi, I bought the following to make a new bottom skin for my hull.
AW5251-H22 BS EN485 (NS5-H3 BS 1470) 2.5mm thick x 2500mm x 1250mm
Smiths Metal Centre
Unit 10
Unicorn Business Park
Whitby Road
Bristol
Tel 01179712800
cost was £81.33 in November 2011
AW5251-H22 BS EN485 (NS5-H3 BS 1470) 2.5mm thick x 2500mm x 1250mm
Smiths Metal Centre
Unit 10
Unicorn Business Park
Whitby Road
Bristol
Tel 01179712800
cost was £81.33 in November 2011
Re: Aluminium/Duralumin sheet specification
Could that have been the "Stainless steel bolts instead of rivets" thread? If so, that's where Jaguar originally posted :-Diomedea wrote:Suggest you have a try at the search function on this site. Some while ago there was a thread including a source.
They have 13 locations all over England (none in Scotland, Wales or Northern Ireland). - map here.Jaguar wrote:with regard to aluminium sheet, I bought a full sheet (2500mmx1250mmx2.5mm) NS4-H3 sheet from Smiths Metal centre Ltd, in Bristol. Tel 01179712800. I paid £81.33 incl VAT for collection only. I think they have other centres across the country. I would think they also supply half sheets or may be even smaller.,When I was phoning around for supply/price there was a vast difference in price, some sheets were 3 times the price i paid so shop around!
I hope my new Alpine floats better than my old one!
Re: Aluminium/Duralumin sheet specification
I've been having a closer look at 2002 and 2003 (built in 1961) and I've found that nearly everything appears to be around 2mm which equates to 14swg with the exception of the seat strengthening ribs which appear to be around 2·5mm or 12swg. I haven't yet checked the deck and bottom though.Rapier wrote:Might not help but 1954 info. says alloy specification was A.W.5C. Bottom and decking thickness was 14 s.w.g and sides, bulkheads and transom 16 s.w.g.
I hope my new Alpine floats better than my old one!