Here's a little video showing some of the build pics from my runabout Lady S plus a bit of footage at the end.
Not a restoration I know but a project none the less, hope you all enjoy.
Lady S Build Video
- water_buoy
- Posts: 355
- Joined: Fri Mar 16, 2012 8:19 am
- CMBA Member: 842
- Location: Cirencester, Gloucestershire
- Contact:
Lady S Build Video
Last edited by water_buoy on Thu Aug 30, 2012 7:06 pm, edited 2 times in total.
My Boat Building Facebook Page http://www.facebook.com/rockethydroplanebuild
Re: Lady S Build Video
Very nice work and I thought I was building in a tight space
SEAN-NÓS http://www.youtube.com/watch?v=Qd6vkPjEy4U
Crackerbox build http://player.vimeo.com/video/87412648
The launch https://www.youtube.com/watch?v=BfNjkhMRt40
Crackerbox build http://player.vimeo.com/video/87412648
The launch https://www.youtube.com/watch?v=BfNjkhMRt40
- water_buoy
- Posts: 355
- Joined: Fri Mar 16, 2012 8:19 am
- CMBA Member: 842
- Location: Cirencester, Gloucestershire
- Contact:
Re: Lady S Build Video
Cheers, it's and old shipping container turned workshop which is a little tight! The next one I'm planning to build is two inches wider, I don't think I could get away with going much bigger than that though before I'll have to move.sean-nós wrote:Very nice work and I thought I was building in a tight space
My Boat Building Facebook Page http://www.facebook.com/rockethydroplanebuild
Re: Lady S Build Video
No wonder there's a World shortage of G-cramps!
I hope my new Alpine floats better than my old one!
- water_buoy
- Posts: 355
- Joined: Fri Mar 16, 2012 8:19 am
- CMBA Member: 842
- Location: Cirencester, Gloucestershire
- Contact:
Re: Lady S Build Video
Only about 40 and counting I think
My Boat Building Facebook Page http://www.facebook.com/rockethydroplanebuild
Re: Lady S Build Video
Beautiful work, wasted talent if you’re not a professional joiner.
How did you achieve the finish on the front deck, varnish x lots or is it some type of acrylic finish?
How did you achieve the finish on the front deck, varnish x lots or is it some type of acrylic finish?
- water_buoy
- Posts: 355
- Joined: Fri Mar 16, 2012 8:19 am
- CMBA Member: 842
- Location: Cirencester, Gloucestershire
- Contact:
Re: Lady S Build Video
Thanks! It's about 6 full coats of "Jotun AS Clear" which is a 2 part clear laquer/varnish which has been sanded with a DA every other coat (I started by hand and soon gave up ). The final coat was flatted with a special DA disc which was 4000 grit and then polished.
I went through to the wood in a few places though so I'm going to spend the winter redoing it as well as other bits, I'll probably use epoxy this time though because you can put it on that much thicker so it shouldn't take as long!
I went through to the wood in a few places though so I'm going to spend the winter redoing it as well as other bits, I'll probably use epoxy this time though because you can put it on that much thicker so it shouldn't take as long!
My Boat Building Facebook Page http://www.facebook.com/rockethydroplanebuild