I have some material left over from making a fuel tank for my A series Albatross so i was thinking about making a second to sale on to add to the rebuild funds. Its 3mm thick aircraft grade aluminium, with a 2" filler tube and a 2" hole for the tank sender (if required) and a 3/8" hole for the pick up. If you want to fix the pump bracket on, you can drill and tap the tank to suit the existing rivit holes. I believe the tanks for the A series are a few inches wider than those of earlier boats, my rails are 18" apart so my tank is 17 1/2" wide to suit, however if a narrower tank was required i could alter it before I start fabrication. I was thinking of £275 for the tank. If your interested PM me or give me a call 07779816723
Hopefully, I have managed to upload a picture of mine, the drawing that I made mine from was found on this site - thanks!)