115 Horse Power MERCURY Power Head
115 Horse Power MERCURY Power Head
Can any one help in sourcing the above - preferably complete and 1980 onwards ideally
Last edited by Dakota on Wed Sep 30, 2009 7:08 pm, edited 1 time in total.
- Tremlett 15
- Posts: 659
- Joined: Fri Feb 06, 2009 1:24 pm
- CMBA Member: 73
- Location: Bangor, Co Down, Northern Ireland
Re: 115 Horse Power Power Head
Dakota wrote:Can any one help in sourcing the above - preferably complete and 1980 onwards ideally
which make
Re: 115 Horse Power Power Head
MERCURY - Sorry about that
- Tremlett 15
- Posts: 659
- Joined: Fri Feb 06, 2009 1:24 pm
- CMBA Member: 73
- Location: Bangor, Co Down, Northern Ireland
Re: 115 Horse Power Power Head
Dakota wrote:MERCURY - Sorry about that
"a tower of power"
will make a tele call tomorrow.
- Tremlett 15
- Posts: 659
- Joined: Fri Feb 06, 2009 1:24 pm
- CMBA Member: 73
- Location: Bangor, Co Down, Northern Ireland
Re: 115 Horse Power MERCURY Power Head
no 115s but 2 80s, well almost, already been "donors" for small bits, the boss was not on-site so dont know it engines are ok or any costs, like most old things, NO value until you ask
T 15
T 15
Re: 115 Horse Power MERCURY Power Head
I managed to pick up a 90 together with a spare leg and gear box - just waiting for feedback on condition but looked ok.
Alacarity put me in touch with a guy who had a shed full of straight six parts - I am currently sorting through and should end up with a spare head all being well.
Keep me posted though.
Alacarity put me in touch with a guy who had a shed full of straight six parts - I am currently sorting through and should end up with a spare head all being well.
Keep me posted though.
Re: 115 Horse Power MERCURY Power Head
have picked up on ones travels ............whilst rebuilding a Merc 1000 (for sale to offers as proven incorrect engine for our boat although tested well on it)......
what we were told were two 115 blocks with matched cranks and pistons (1 block honed to tolerance)................ are these of use to you ? will discuss terms if o.k. regards, malc preskey
what we were told were two 115 blocks with matched cranks and pistons (1 block honed to tolerance)................ are these of use to you ? will discuss terms if o.k. regards, malc preskey
Re: 115 Horse Power MERCURY Power Head
Hi,
Are you able to forward serial numbers off power heads ?
Are you able to forward serial numbers off power heads ?